Waterproofing for ceramic tiles outside and inside Boramax, 5 kg

The product is used as a seamless waterproofing under ceramic tiles.
It can be used to seal walls and floor foundations in areas with non-pressurized water, such as bathrooms, toilets, laundry rooms and kitchens.
Used around showers, washbasins, bathtubs, and sinks.
Waterproofing mastic is also excellent as insulation, anti-skid protection for foundations, basements and sloping surfaces, balconies and terraces.

Excellent adhesion to such substrates as: cement-lime plasters, drywall, chipboard, concrete substrates.


Properties
 very flexible and completely waterproof
 frost-resistant
 ability to bridge cracks
 excellent adhesion
 no solvents (slight odor)
 extremely easy to profile (very good working properties)
 universal application

Using:
Waterproofing mastic should be opened and stirred well.
Old layers with poor adhesion, brittle or peeling should be removed.
Porous, absorbent and weak substrates must be primed with Boramax Deep Penetration Primer.
Expansion joints and wall joints, as well as culverts, drainage chambers, and coatings must be sealed with Boramax Tape.

The surface must be flat, dry, clean and free of salt efflorescence.
Stir the mastic thoroughly before first use. Apply 2-3 coats
depending on needs, outdoors 3. Apply the first coat with a roller, brush, trowel,
Apply the second coat in the same manner approximately 2-4 hours after applying the first coat.
The thickness of the resulting coating should be 1.5-2 mm. After complete drying (after
at least 24 hours) you can proceed to laying the tiles.

Usage: 1.5 kg per 1 m2 in one layer.