Sanstore contact glue 0.8 l

Adhesive for technical insulation is one-component adhesive, which is a solution of synthetic caoutchouc with addition of modifier and mixture of organic solvent.

Glue found a great use for the installation of pipe and sheet rubber insulation.
The advantages of glue:

• Works well at high and low temperatures
• High adhesion when mounting on different surfaces
• Has excellent water resistance and resistance to various harmful substances
• Has high strength

Application of glue:

• Glue is recommended when the ambient temperature 5.. 25°С and the allowable humidity is 60-65%
• Before you apply the glue you want to mix
• The surface before applying the glue needed to dry and degrease
• The adhesive is applied on the bonding surfaces evenly, using a brush
• After pasting you must wait for the glue dries (about 5-10 minutes)
• After drying, check to touch the adhesive tack
• It is very important to tightly close the jar with the glue when not in use

Form release glue: banks 0,8 l.

Features:

Application temperature (for coolant): - 40.. +105°С
Adhesive strength - after 24 hours, delamination -55-65 N/cm
The time to reach 70% of the maximum strength of the connection-7-10 min.
The resistance of the connection: 90°С