Roofing funnel SANSTORE 110/600mm with stainless flange, with bitumen apron, with thermal cable

A roof gutter is the best way to drain melt and rainwater from the surface of a flat roof (operated and unoperated, inverted, standard or "green").

They are installed with any heat and waterproofing materials. A variety of options makes it possible to choose a roof funnel and accessories for any thickness of a flat roof.

Roof funnel with stainless steel flange and heating cable , 100 or 600 mm high, consists of: a body with a pipe with a diameter of 110 mm, a stainless steel clamping flange, a set for attaching it to the funnel body, a leaf catcher and a heating system.

The roofing funnel is also equipped with a PVC or bitumen apron for easy attachment to PVC roofing or roofing felt.

The funnel body provides a tight fit to the waterproofing and vapor barrier layer of a flat roof, and the leaf catcher prevents leaves and other debris from entering the roof drainage system.

The presence of a stainless steel flange allows for better sealing on the roof surface.

The heating system includes a fixing rim, into which the self-regulating cable is placed and attached to the funnel body. The self-regulating cable has an operating voltage of 220V, a power of 15W, and changes its heat output depending on the ambient temperature.

*To limit heating and save electricity, it is recommended to connect the cable through a thermostat that operates in the temperature range from -5°C to +5°C.

Advantages of using PVC funnels:

- any type of waterproofing;
- service life – at least 50 years;
- light weight;
- easy installation;
- resistance to aggressive environments and UV;
- wide range for any project;
- operating temperature from -50 0 to +90 0 С;

TECHNICAL SPECIFICATIONS:

• receiving pipe diameter (DN) – 110 mm
• pipe height - 600 mm (60 cm)
• operating conditions - t −50°С… +90°С
• throughput - 8l/s
• service life – 50 years
• material: PVC (polyvinyl chloride)
• additional: stainless steel flange
• apron material: PVC membrane or roofing felt
• cable heat dissipation - 30 W/m
• voltage: 220V
• maximum power consumption: 0.16A
• manufacturer: Ukraine