Aerator (deflector) for flat roofs 110/600 mm

Functions of aerators: to ensure free movement of air in the under-roof area, to remove moisture and water vapor from under the roof.

Aerators are installed on the roof to eliminate problems such as damage to the roof surface or the formation of mold and fungi. As well as in the absence of air circulation and ventilation of the under-roof space.

The aerator (deflector) consists of a body and a protective cap. The diameter of the deflector pipe is 110 mm. Height is 600 mm.

Aerators are installed on flat roofs evenly across the entire area at the joints of thermal insulation boards, namely at the highest points.

One aerator is installed per 60-100 m2 of roof. The distance between them should not exceed 12 m. If there is a ridge and a gutter on the roof, install it at the watershed of the gutter and along the ridge.

Installation examples:

Technical specifications:

Raw material for the body: PVC;
Outlet pipe diameter: 110 mm;
Installation density: 1 piece per 60-100m2 of roof;
Aerator height: 600 mm;
Operating temperature: from -40 to +80 ° C;