4063.360 Corner drain 234x330mm, tile solution, square body, siphon 360, stainless steel solution,

Shower drain accessories:
Stainless steel body
360° swivel siphon with polypropylene
Gate (double water lock)
Stainless steel grill (supplied in a protective PE film).
* The product is packed in a cardboard box

The drain has a triangular shape, which means that the installation is carried out exclusively at the point of contact between the wall and the floor. When installing such a model, the floor slope is made only towards the wall, that is, towards the place of installation of the drain. Due to this, the flowing water does not overflow into other parts of the shower area.

The body, grate and edge of the drain are made of durable AISI 304 stainless steel. The thickness of the steel grate is 1.5 mm. Only the siphon and the shutter are made of polypropylene (plastic) in this model. Another advantage of this drain is a 360° rotating siphon. This significantly simplifies installation, as the drain can be easily connected to any sewer pipe. The siphon outlet is horizontal to a DN50 pipe. The installation height is 84 mm. The flow rate is 42 l/min, which will allow the drain to be used with various types of shower heads. A double water seal inside the gutter will prevent unpleasant odors from entering the sewer.

Wet type = barrier with a water level of 36 mm.

Field of application: shower rooms in residential buildings, showers in hospitals, hotels, swimming pools, gym locker rooms, etc.

Ladder height: 8.4 cm
The length of the base of the grate is 33 cm.
Side grill ribs 23.4 cm long
Grid thickness 1.5 mm