How to remove fungus on brick walls and wood

Fungus on brick walls and wood is the result of the development of mosses and mold, which usually appear in conditions of high humidity and insufficient air exchange. In such conditions, the fungus spreads rapidly, especially on brick or wooden surfaces where moisture is well retained. The presence of fungus can lead to deterioration of the material, as well as create an unpleasant odor. The fungus must be dealt with effectively, as it can spread quickly and lead to degradation of the material or even pose a threat to health. In order to successfully fight the fungus, it is important to choose the right method of destruction that will be most effective for a particular situation.

Ways to remove fungus

There are several ways to remove fungus from brick walls and wood. The first method is mechanical removal, when the fungus is physically removed from the surface. This method works efficiently but can be resource-intensive. And there is no certainty that the fungus will not return to the places of formation.

The second approach is to use special antifungal drugs or solutions. These products are designed to kill fungi and mold by penetrating deep into the material and providing long-term protection against their reappearance.

Antifungal Mixture

The most effective way to remove fungus on brick walls and wood is to use special mixtures that both remove and prevent its further growth. For example, mixtures based on chlorox or hydrogen peroxide can effectively remove fungus and provide long-term protection. They reliably destroy fungus and ensure safety for the surface.

You can buy the best mixture on our Sanstore website. It is suitable for removing mold and mildew from wood, walls, plaster and even paints, adhesives and emulsion paints, providing effective control against unpleasant deposits. The mixture is intended for use on surfaces that are frequently exposed to moisture, such as swimming pools, bathrooms, laundry rooms and kitchens. Rooms that have been treated with this product,   It should be well ventilated until the peculiar smell disappears completely. It is used both inside and outside homes.

Main features:

• Broad Spectrum: This product can be used on a variety of surfaces.
• Deep Penetration: It is extremely effective due to its ability to penetrate deep into the material.
• Indoor & Outdoor Use: Suitable for both indoor and outdoor use.
• Non-flammable product: This product is safe to use as it does not support combustion.

How to Use the Mixture

Apply an antifungal agent to the surface and wait 60 minutes, then remove the fungus and apply a new coat of paint or, if it is a brick, leave it to dry completely. To prevent mold from reappearing, it is important to control humidity levels with a ventilation system or regular ventilation.

Depending on the thickness of the paint layer, one liter of product is usually enough for an area of 2.5 to 5 m². This product should be stored in its original tightly closed container, in cool, well-ventilated rooms, away from heating zones.

Conclusion

To remove fungus on brick walls and wood, the best solution may be to use special mixtures of antifungal agents that effectively remove and prevent further growth of mold and moss. Attention should also be paid to precautions – ensure adequate ventilation and reduce the humidity in the room to avoid the reappearance of fungus.