XPE sheet SanstoreFoam 10mm (1x50m) 25 kg/m3

Sheet insulation made of chemically crosslinked polyethylene foam has many applications in the construction sector. It is used between walls, floating floor systems, under parquet and underfloor heating systems, plasterboard, metal structures, as a sound and heat insulation board from the foundation to the roof.


Main characteristics of chemically crosslinked polyethylene foam:
1. Low vapor permeability
2.Very good thermal insulation properties
3. Low smoke toxicity
4.Environmentally safe
5.Excellent cushioning
6.High tear resistance
7. Light weight – easy to transport
8. Flexibility – ease of installation

Main areas of application:

- automotive industry;
- acoustics;
- aerospace, marine;
- construction and insulation;
- electronics;
- engineering systems;
- medicine;
- sports and recreation;
- goods for service structures;
- packaging.


The material has a density of 30kg/m3, but can be both higher and lower. Material with this density is ideal for use under the screed. It acts as a sound insulation against impact noise. It has acoustic test protocols, which indicate the thickness and level of noise reduction.

5mm – 28dB
8mm – 30dB
10mm – 31dB
The material can also be 3mm thick, used as a substrate for laminate. And thicknesses of 10, 15 and 20mm can be used as noise insulation for ventilation systems, thermal insulation for pipes, or even cut as carpet mats.

Chemically cross-linked polyethylene is environmentally friendly, safe, easy and quick to install. The roll width can be 1 or 1.5m, and the winding can be 50 or 100m.

Technical specifications:
Thickness: 10mm
Roll size: 1x50m