Concrete screed sheet SanstoreFoam made of chemically cross-linked polyethylene, thickness 5mm, 1m*100m
Brand: Sanstore
Product Code: 000001899
All about product
Description
Reviews
0
Payment
Customer support
Customer support service
Concrete screed sheet SanstoreFoam made of chemically cross-linked polyethylene, thickness 5mm, 1m*100m
72.00 ₴
-10%
64.80 ₴/м2
Description
Sheet insulation made of chemically crosslinked polyethylene foam has many applications in the construction sector. It is used between walls, floating floor systems, under parquet and underfloor heating systems, plasterboard, metal structures, as a sound and heat insulation board from the foundation to the roof.
The material has a density of 30kg/m3, but can be both higher and lower. Material with this density is ideal for use under the screed. It acts as a sound insulation against impact noise. It has acoustic test protocols, which indicate the thickness and level of noise reduction.
5mm – 28dB
8mm – 30dB
10mm – 31dB
The material can also be 3mm thick, used as a substrate for laminate. And thicknesses of 10, 15 and 20mm can be used as noise insulation for ventilation systems, thermal insulation for pipes, or even cut as carpet mats.
The material has a density of 30kg/m3, but can be both higher and lower. Material with this density is ideal for use under the screed. It acts as a sound insulation against impact noise. It has acoustic test protocols, which indicate the thickness and level of noise reduction.
5mm – 28dB
8mm – 30dB
10mm – 31dB
The material can also be 3mm thick, used as a substrate for laminate. And thicknesses of 10, 15 and 20mm can be used as noise insulation for ventilation systems, thermal insulation for pipes, or even cut as carpet mats.
For the installation of a screed using chemically cross-linked polyethylene foam, we recommend the use of a construction protective film and tapes for gluing joints and seams: XPE tape 50 or 70 mm wide (3 mm thick) or Duct Tape.
The material is always available in stock. We are a direct importer.
Dimensions:
Rolls 1x100 m.
Thickness: 5 mm
Technical characteristics:
Density: 30 kg/m3. (higher densities are possible on request)
Color: gray
Application temperature: -60... 95C.
Thermal conductivity coefficient: up to 0.037 W/m*oC
Vapor permeability coefficient, mg/m*h*Pa: 0.05
Water absorption by volume at full immersion 96 h, %: ≤ 1.9
Dynamic modulus of elasticity at a load of 2000 N/m2, MPa: 0.25
Dynamic modulus of elasticity at a load of 5000 N/m2, MPa: 0.70
Flammability group – G4 (highly flammable)
Impact noise reduction index: ΔLnw= 28 dB (thickness 5 mm), 30 dB (thickness 8 mm), 31 dB (thickness 10 mm).
Country of manufacture: Turkey.
Reviews
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.